Removing The Blade Scraper; Removing The Top Plate - Graef Concept Line Série Mode D'emploi

6.4.3 Removing the blade scraper

- Pull out the blade scraper leftwards (dovetail guides).
- To do so, reach into the provided finger recesses, as shown in the figure.

6.4.4 Removing the top plate

- Preliminarily, swivel up the remainder holder.
- CO30, 30S, 30 F, CO25L: For some turns, loosen the black knurled nut (a).
- Pull the plate upward and swivel the lower retaining pin out of the elongated hole
(a)
- CO25, 25S: On the top plate, press the locking device (b) together and pull out the top plate upward
- Pull the plate upward and swivel the lower retaining pin out of the elongated hole
(b)
48