Cleaning Schedule - Graef Concept Line Série Mode D'emploi

6.3 Cleaning schedule

Work steps Cleaning agents
1. Preparatory
measures
2. Dismount the
removable parts
according to the
operating manual
3. Coarse cleaning
Manual
4. Cleaning 2 % "P3 sterile",
for example. Acting
time: approx. 15
min (also see prod-
uct data sheet)
4. Disinfecting 0.5 -2%
Additional „P3-alcodes"
measure Acting time: see
product data sheet
5. Rinsing Drinking water
6. Checking
7. Drying
8. Maintaining Oils for the food-
stuffs sector with
H1 approval
9. Mounting
10. Precautionary Cover the machine when cleaning the environment with a spraying device
measures
Procedure Cleaning device
Close the cutting
thickness adjust-
ment.
Pull the mains plug.
Removing the Plastic scraper, also
product residues with removable
with a parts.
Plastic scraper
after thorough Brush, tub,
pre-flushing with Cleaning cloth,
(max. 40°) water; Hand spraying
acting time approx. device
20 minutes
manual spraying One-way cleaning
Do not exceed the cloth, hand spray-
acting time accord- ing device
ing to the product
data sheet
Temperature One-way cleaning
max. 50 ° cloth
Hand spraying
device
Water hose
visually for optical
cleanliness
rubbing dry One-way cleaning
in the open air cloth
Let dry
Application by One-way cleaning
spraying or rubbing cloth
mounting takes
place in reverse or-
der to dismounting
(Operating manual)
46
Notes
Immediate begin-
ning
all dismounted and
stationary machine
parts
additional protec-
tion, Spacing while
spraying approx.
30 mm
Remaining machine
removed parts
removed parts
Machine, Put
dismounted parts
apart as possible
Prior to starting
work, rinse all
parts that get into
contact with the
cutting material
Personnel must
have clean and
disinfected hands