Preservation Of Value - Blade; Removing The Blade; Slide - Graef MASTER Mode D'emploi

the unit. Use a mild detergent in case of heavy soiling.

Preservation of value - blade

For a long-lasting sharpness and for a preservation of
the value of your Graef blade we recommend that the
blade be cleaned in regular intervals, especially after
cutting cured meat or ham. They contain salts which when
on the blade surface for a longer period of time could
produce so-called "rust film" ( on "stainless steel" as well).
When cutting products which contain a lot of water, such
as tomatoes or cucumbers, a lack or wrong (too "wet")
cleaning may produce rust on the blade surface.
For this reason we recommend that you use a moist cloth
and a bit of detergent, if and when necessary, to clean
the blade directly after use. Never put the blade in a
dishwasher, firstly due to decrease in sharpness and
corrosion resistance (salts attack the blade), and secondly
due to safety in handling the blade whilst loading and
unloading the dishwasher.

Removing the blade

Unscrew the blade from time to time and clean the unit
on the inside. Do this, especially "juicy" cutting material
(tomatoes, fruit, roasts, et cetera) are cut. Handle the
blade with great care.
Remove the slide.
●
Use the black handle grip to turn the blade cover plate
●
in the direciton of the arrow upwards until it is vertical
over the motor body. During this action in the initial
position, the snap point has to be overcome first of all.
Applying slight pressure, the blade can be removed.
●
Undo the blade by using a coin to turn the blade screw
●
clockwise.
Use a moist cloth to clean the inside of the blade and
●
the black ring.
Place the blade in reverse order.
●

Slide

In order to clean the slide better, remove it from the unit.
Press the carriage lock on the bottom right side of the
●
carriage upwards and keep pressed while pulling the
carriage towards you.
Use a moist cloth or running water to clean all parts.
●
Important: Do not clean the slide in a dishwasher!
Once a month, add some drops of resin-free oil or
●
petroleum jelly to the slideway. Use a soft cottonwool
cloth to remove excessive oil / petroleum jelly.
DE
EN
FR
NL
IT
ES
PYC
17