Safety Instructions - Graef MASTER Mode D'emploi

Safety instructions

This unit is in conformity with the safety instructions
mentioned hereinbefore. However, incorrect handling
may lead to injury and damage.
For safe handling of this unit, please observe the following
safety instructions:
Before using the unit check for any external visible
●
damage of the housing, the connection cable and plug.
Do not operate a damaged unit.
In case of a damage of the connection cable of the
●
machine, the unit may be replaced by the manufacturer
or the after-sales service or a similarly qualified person
only, in order to avoid any danger.
Repairs may be carried out only by an expert or by
●
Graef after-sales service. Incorrect repairs may cause
considerable hazards for the user. In addition, any
claim under guarantee is forfeited.
A repair of the unit during the guarantee period may
●
be carried out by Graef after-sales service only as
otherwise there is no claim under guarantee in case of
subsequent damage.
Defective parts must be replaced by original spare
●
parts only. It is only with these parts that the safety
requirements are met.
This unit must not be used by children. This unit and its
●
power cable must be kept away from children.
This unit may be used by persons with reduced physical,
●
sensory or mental abilities or deficiencies in experience
and knowledge, if they are supervised or have been
instructed in the safe use of the unit, and in addition
understand the resulting dangers.
Children must not play with this unit.
●
In the absence of supervision and prior to assembly,
●
during cleaning disconnect the unit from the mains.
The unit is not intended to be used with an external timer
●
or a separate remove control.
This unit is intended for use in households and similar
●
use, such as: Staff kitchens in shops and office; in
agricultural estates; by guests in hotels, motels and other
living quarters; in bed and breadfast boarding houses.
Always disconnect the connection cable by using plug;
●
do not pull the connecting cable.
Before connecting the unit compare the connection
●
data (voltage and frequency) on the typeplate and
your mains. These data have to be in conformity so that
DE
EN
FR
NL
IT
ES
PYC
13