Safety Instructions - Graef UNA Mode D'emploi

Safety instructions

This unit complies with the statutory safety regulations. Improper use can,
however, lead to personal injury and property damage.
To handle the unit safely, follow the instructions below:
Check the unit for external, visible damage to the housing, the connector
●
cable and the plug before using it. Do not put a damaged unit into operation.
If the machine's connecting cable is damaged, continued use of the machine
●
is only allowed it has been replaced with a new one. Have it installed solely
by the manufacturer or its customer service or a similarly qualified person to
prevent hazards.
Repairs are only allowed to be performed by a specialist or by the Graef
●
customer service department. Improper repairs can lead to extreme hazards
for the user and damage the unit. Furthermore, the warranty claim expires.
Only Graef customer service is authorised to repair the unit during the
●
warranty period, otherwise the warranty expires for subsequent damages.
Defective components must be replaced solely with genuine spare parts.
●
Fulfilment of the safety regulations is only guaranteed if these parts are used.
This unit must not be used by children. This unit and its power cable must be
●
kept away from children.
This unit may be used by persons with reduced physical, sensory or mental
●
abilities or deficiencies in experience and knowledge, if they are supervised
or have been instructed in the safe use of the unit, and in addition understand
the resulting dangers.
Children must not play with this unit.
●
In the absence of supervision and prior to assembly, during cleaning
●
disconnect the unit from the mains.
The unit is not intended to be used with an external timer or a separate
●
telecontrol system.
This unit is intended to be used in household and similar applications such
●
as: staff kitchen areas in shops, offices and other working environments; farm
houses; by clients in hotels, motels and other residental type environments;
bed and breakfast type environments.
If the supply cord is damaged, it must be replaced by the manufacturer, its
●
service or similarly qualified persons in order to avoid a hazard.
DE
EN
FR
ES
IT
NL
S
DK
NO
PYC
CZ
SK
PL
15