Publicité
Les langues disponibles
Les langues disponibles
Sub-page
SERIAL NUMBER
DEVICE TYPE
MODE OPERATION
RUNNING HOURS
CLOCK
5.5.2 Parallel information
The page containing the information about the parallel is only enabled if the UPS is in parallel
with others UPS.
Picture 33 – Parallel information
5.5.2.1 Parallel index
The first number identifies the position of that specific UPS within the parallel system. The
second number represents the total number of UPS units.
5.5.2.2 Master / Slave priority
The string on the second line may have two values, "MASTER" or "SLAVE". Only one MASTER
UPS can be present in the system; if not there will be a conflict on the data communication bus.
UPS user manual
Manuel de l'utilisateur de l'ASI
Utilizzo dell'UPS
Displayed data
Serial number assigned by the manufacturer and by
a possible OEM distributor
Device type (ON LINE, ECO,ecc.)
It may be SINGLE, or PARALLEL in case the
system is in parallel with others UPS
Equipment operating hours
Current system date and time setting
OMP06263 REV. B
43
Publicité
Chapitres
