Setting The Battery - LEGRAND KEOR HPE Manuel De Fonctionnement

5.4.3 Setting the battery

In case the UPS has been tested without knowing the characteristic data of the storage battery,
the BATTERY PARAM section allows to set such data. Each single settable parameter can be
accessed via the following page.
Picture 24 – Battery parameters setting
The various parameters setting pages are similar to each other and requires the operator to
enter and confirm the value; the setting page of the battery capacity is given below as a
reference.
Picture 25 – Battery parameters setting
38 OMP06263 REV. B
UPS user manual
Manuel de l'utilisateur de l'ASI
Utilizzo dell'UPS