Setting The Display Language - LEGRAND KEOR HPE Manuel De Fonctionnement

UPS user manual
Manuel de l'utilisateur de l'ASI
Utilizzo dell'UPS
Picture 22 – Clock automatic setting
The NTP server access parameters can be configured via the Network configuration pages in
the Settings section. In case the server does not respond or the LAN connection is lacking, the
message NTP ERROR will be displayed.

5.4.2 Setting the display language

The following picture shows the languages that can be set.
Picture 23 – Language setting
The language selection is made pressing one of the flags.
OMP06263 REV. B 37