Hach ORBISPHERE 3100 Manuel D'utilisation Simplifié page 22

6.6 Service instrument
1. Board information
Option
Board information This option is useful for troubleshooting purposes and displays information
2. Temperature checking
Option
Temperature
checking
3. Sample temperature calibration
Option
Sample temperature
calibration
4. Miscellaneous
Option Description
Enable raw Check the box to enable the capture of raw data which is useful for
data logger troubleshooting purposes
Activate Check the box to activate the service timer option.
service timer
When activated, the instrument will automatically remind the user when the
next sensor service is due.
Enter the Nb of days between services in the box provided. This defines the
due date of the next sensor service.
If activated, select the Reset service timer option each time the instrument
has been serviced. This automatically sets the Last service date parameter to
the current date.
Note: The total uptime of the instrument is displayed at the bottom of the screen.
6.7 Service O2 channel
1. O2: Calibration parameters
Option
O2: Calibration
parameters
2. O2: DC measurement parameters
Option
O2: DC measurement
parameters
22 English
Description
about the mother board, measurement board and battery
Description
This option is useful for troubleshooting purposes and displays the
temperature readings of the measurement board, pigtail, battery pack
and sample
Description
You will need a sensor simulator for this option. Follow the on-
screen instructions to calibrate the sample temperature
Description
This option is useful for troubleshooting purposes and will display a
number of values associated with the measurement channel
Description
This option is useful for troubleshooting purposes and will
display the values of the fluorescent and reference LED current