Hach ORBISPHERE 3100 Manuel D'utilisation Simplifié page 20

6.5 Import / Export
Note: To import files into the instrument from a USB mass storage device, they must be under a top-level directory
of 3100 for them to be recognized.
1. Export files
Option Description
Export This option allows you to export a number of different files to a USB mass storage
files device. Once written to the USB device, it can then be used to load these files to
other 3100 instruments or to a PC.
Make sure a USB device is connected and then press the Enter key to start the
process. A progress bar is displayed at the bottom of the screen.
Wait until the export complete message is displayed on screen before removing the
USB device.
2. Import user table
Option Description
Import This option allows you to import user tables from a USB mass storage device.
user table These tables could be exported from other 3100 instruments or from the
3100 software application installed on your PC. The tables are recognized by
having an extension of .ndu. If more than one table is found on the device, you will
need to select the table you want from the list.
Press the down arrow key to highlight the Import File option and press the Enter
key to start the process. You will need to restart the instrument before the new
table takes effect.
3. Import measurement configuration table
Option
Import
measurement
configuration
table
20 English
Description
This option allows you to import measurement configuration tables from a
USB mass storage device. These tables could be exported from other
3100 instruments or from the 3100 software application installed on your
PC. The tables are recognized by having an extension of .cdm. If more
than one table is found on the device, you will need to select the table you
want from the list.
Press the down arrow key to highlight the Import File option and press the
Enter key to start the process. You will need to restart the instrument
before the new table takes effect.