Hach ORBISPHERE 3100 Manuel D'utilisation Simplifié page 14

From the measurement screen, press the right arrow key until the list of users stored in the
instrument is displayed. Standard users will be displayed in green and supervisors in blue.
Note: These user lists are defined by the user on the PC (see
the instrument (see Transfer files to the instrument
Press the up and down arrow keys to scroll through the list of users. When the required one is
highlighted press the Enter key to select it. If a supervisor level user is selected a password will be
required (by default Supervisor1 is 5678). On completion, the display returns to the measurement
screen.
5.4 Standard measurement display
1 Instrument date and time
2 Measurement location and product name
3 User name
4 Sample temperature
5 Measured gas
6 Measurement unit
• The user name will be displayed in green for a standard user, or blue for a supervisor
• The battery life remaining will not be displayed if using mains power supply, instead the icon will
show the battery recharging symbol
• The measurement value is normally displayed in blue, but will be displayed in red if it is outside the
high or low value alarm limits
• If measurement is in sample mode, the bottle icon is displayed at the top right of the screen. If
measurement mode is set to continuous, the bottle icon will be displayed with a cross through it
• The measurement display is refreshed every 5 seconds
5.5 Graphical measurement display
To access this display from the standard measurement display screen, press the right arrow key on
the keypad until the graphic screen is displayed:
This screen gives a graphical representation of the measurement with the numeric value of the
measurement displayed at the end of the curve. The above example shows the measurement in
sample mode.
14 English
Create new user table
on page 11).
7 Battery life remaining
8 USB symbol indicates USB key attached
9 Measurement mode (continuous shown)
10 High level alarm value (if set)
11 Low level alarm value (if set)
12 Measurement value
on page 11) and imported into