Connection Of Relay Output - Lenze 8200 vector Instructions De Montage

Show/Hide Bookmarks Show/Hide Bookmarks
Abb. 1-12
Function
X1.2/K11 Relay output
normally-closed contact
X1.2/K12 Mid position contact
X1.2/K14 Relay output -
normally-open contact
PES HF-screen end by PE connection through screen bracket.
Tip!
l
l
l
L
Relay setting
switched
A connection of the relay output is not required for operation!
The output message can be changed under C0008 or C0415/1.
The relay output can also be used to control the holding brake at the motor (see
Operating Instructions).
Electrical installation

Connection of relay output

Message
(Lenze setting)
open TRIP
closed TRIP
EDK82EV3 DE/EN/FR 2.0
8200vec061
Technical data
AC 250 V/3 A AC 250 V/3 A
DC 24 V/2 A ... DC 240 V/0.22 A DC 24 V/2 A DC 240 V/0 22 A
5
15