Relay Output Connection - Lenze 8200 Motec Instructions De Montage

All manuals and user guides at all-guides.com
Electrical installation
4

Relay output connection

X1
1a
Function
X1/K11 NC contact relay output
X1/K12 Relay middle contact
X1/K14 NO contact relay output
PES HF screen termination by PE connection with a surface as large as possible
Tip!
Operation does not require a connection of the relay output!
l
The output message can be changed under C0008 or C0415/1.
l
The relay output can also be used to control a holding brake at a motor (see
l
Operating Instructions).
24
Abb. 1-22
Relay position
set
open
closed
EDK82MV222 DE/EN/FR 3.0
K14 K12 K11 X1
Message
Technical data
(Lenze setting)
TRIP
AC 250 V/3 A AC 250 V/3 A
DC 24 V/2 A ... DC 240 V/0.22 A DC 24 V/2 A
TRIP
8200 motec
PES
PES
8200mot148
DC 240 V/0 22 A
L