Motec With Motor Or Geared Motor; Wiring According To Emc Requirements - Lenze 8200 Motec Instructions De Montage

All manuals and user guides at all-guides.com

motec with motor or geared motor

3

Wiring according to EMC requirements

Conditions for trouble-free operation:
Except for the mains cable, use shielded cables only.
l
The shield must be carefully connected to PE.
l
Connect motor and mains PE conductors to separate PE terminals.
l
A
B
C C
0
Mains cable L1, L2, L3, PE
1
PE connection - mains cable
2
Shielded control cable
3
Shield connection for control cable (screw shield to shield sheet)
4
Function module
X1 Terminal strip - mains connection
PES HF shield connection by connecting the shield with a surface as large as possible to PE
12
X1
D D
EDK82MV222 DE/EN/FR 3.0
I
8200mot101
Shield connection
1. Prepare cable
2. Route the cable
through the eyebolt
of the shield and
bend the eyebolt.
3. Tighten the screw.
The shield must be
tightly connected to
the shield sheet.
0.7 Nm
6 lb-in
PES
L