Starting The Engine - Yamaha Rhino Fuel Injection 700 FI YXR70FY Manuel Du Propriétaire

Starting the engine

1. Turn the main switch to "ON".
NOTICE
The coolant temperature warning light and en-
gine trouble warning light should come on,
then go off.
If a warning light does not go off, see pages
4-9–4-11 for the corresponding warning light
circuit check.
2. Apply the brake pedal.
3. Shift the drive select lever into the neutral po-
sition.
G
When the drive select lever is in the neu-
tral position, the neutral indicator light
should come on. If the neutral indicator
light does not come on, ask a Yamaha
dealer to inspect the electric circuit.
6-7
5B410007