Yamaha Rhino Fuel Injection 700 FI YXR70FY Manuel Du Propriétaire page 312

1
3
4
1. Projection (× 2)
3. Slot (× 2)
1. Patte de fixation (× 2)
3. Fente (× 2)
1. Saliente (× 2)
3. Ranura (× 2)
2
2. Slot (× 2)
4. Projection (× 2)
2. Fente (× 2)
4. Patte de fixation (× 2)
2. Ranura (× 2)
4. Saliente (× 2)
To close
Lower the hood slowly to its original position, and
then hook the hood latches. Secure projections 1
on the rear of the hood into slots 2 on the back of
the instrument panel. Secure slots 3 on the side
of the hood around projections 4 on the frame.
NOTICE
G
Make sure that all cables and wires are in
place when closing the hood.
G
Do not drive the vehicle with the hood
open, unlatched, or removed.
8-19