Yamaha Rhino Fuel Injection 700 FI YXR70FY Manuel Du Propriétaire page 334

1. Final gear case guard
1. Protège-carter de couple conique arrière
2. Vis et entretoise (× 7)
1. Protección de la caja de la transmisión final
2. Perno y casquillo (× 7)
1
1. Final gear oil drain bolt
1. Vis de vidange d'huile de couple conique arrière
1. Tornillo de vaciado de aceite de la transmisión final
2
1
2
2. Bolt and collar (× 7)
Changing the final gear oil
1. Park the vehicle on a level surface.
2. Remove the final gear case guard by remov-
ing the bolts and the collars.
3. Place a container under the final gear case to
collect the used oil.
4. Remove the oil filler bolt and the drain bolt to
drain the oil.
5. Reinstall the drain bolt, and then tighten it to
the specified torque.
Tightening torque:
Final gear oil drain bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
8-41