Adjusting The Rear Shock Absorber Assemblies (Yxr70Fsepy) - Yamaha Rhino Fuel Injection 700 FI YXR70FY Manuel Du Propriétaire

Adjusting the rear shock absorber assemblies
(YXR70FSEPY)
The spring preload, rebound damping and com-
pression damping forces of the rear shock absorb-
er assemblies can be adjusted to suit the
operating conditions.
WARNING
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and un-
derstand the following information before han-
dling the shock absorber assemblies.
G
Do not tamper with or attempt to open the
cylinder assemblies.
G
Do not subject the shock absorber assem-
blies to an open flame or other high heat
source. This may cause the unit to explode
due to excessive gas pressure.
G
Do not deform or damage the cylinders in
any way. Cylinder damage will result in
poor damping performance.
G
Do not dispose of a damaged or worn out
shock absorber assembly yourself. Take
the shock absorber assembly to a Yamaha
dealer for any service.
4-67
5UG1B002