Parts Covered By The Warranty - Scania DC13 XPI Manuel De L'utilisateur

shall not be liable under this article to war-
rant failures of warranted parts caused by the
use of a non-exempted add-on or modified
part.
11.
The Executive Officer of the California Air
Resources Board may request, and in such
case, the engine manufacturer shall provide,
any documents which describe that manufac-
turer's warranty procedures or policies.

Parts covered by the Warranty

The following is a list of parts considered to be
part of the Emission Control Systems covered by
the Emission Warranty for Scania industrial en-
gines which were built to conform to federal and
California emission control regulations:
1.
Fuel injection system.
2.
Air induction system.
3.
Exhaust manifold system.
4.
Smoke puff limiter (included in ECU).
5.
Oil filler cap.
6.
EGR system (when applicable):
a)
Cooler.
b)
EGR valve.
7.
Exhaust brake (when applicable).
8.
NOx sensors:
a)
NOx sensor, engine out.
b)
NOx sensor, tail pipe.
9.
DOC (when applicable).
10.
SCR system:
a)
DEF tank.
b)
DEF tank level, temperature and quality
sensors.
c)
DEF hose.
d)
DEF injector.
e)
DEF injector pressure and temperature
sensors.
f)
Evaporator.
g)
SCR catalyst inlet temperature sensor.
h)
SCR catalyst including the ammonia-slip
catalyst.
i)
SCR control unit (EEC3).
OPM 200 fr-FR
Scania engines engine warranty for industrial engines
8
©
Scania CV AB 2019, Sweden