Trigger Alarm; Trigger Restore; Auto Report; Text Forward - Abus AZWG10020 Instructions D'installation Et De Service

12.7.1

Trigger Alarm

Determines which contacts to call (1 to 10) when the corresponding alarm
input is triggered.
12.7.2

Trigger Restore

Determines which contacts are called (1 to 10) when the corresponding
alarm input returns to its normal state (e.g. an upstream alarm system is
reset after an alarm).
12.7.3

Auto Report

Determines which contacts (1 to 10) are called by the auto report.
See also the settings in "System Options  Report Options"
12.7.4

Text Forward

Determines the contacts (1 to 10) to which received SMS messages are
forwarded.
See also "Messages  Inbox"
12.8 Date & Time
Here you set the current date and the current time.
This data is used for:

The date/time stamp for the event log

The date and time are inserted into text messages (SMS)

The date and time appear on the standby screen
The date is displayed in the format dd.mm.yy.
The time is displayed in 24-hour format.
The internal clock is intended only as a guide. The accuracy is not compara-
ble with a good quartz watch.

12.9 View Log

The device has an event log with a time and date stamp. Important system
events are logged here. The log can store 128 entries. The memory oper-
ates as a non-volatile circular buffer, i.e.:

The entries are retained even when the power is interrupted

The oldest entries are overwritten with the newest entries when
the capacity is reached
Event
Memo Left
Memo Cleared
Trig A Alarm
Trig A Clear
Meaning
Memo available
Memo was deleted
Triggering of input A
Inputs B–H analogously
Input A is again in the normal state
34 UK