Safety Information - Abus AZWG10020 Instructions D'installation Et De Service

Transmetteur téléphonique gsm/rtc
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 109
This symbol indicates special tips and notes on the operation of
the unit.
5.

Safety information

General
Open the device carefully. Avoid direct physical contact with the PCB.
Electrostatically sensitive devices can be damaged.
Use suitable tools for mounting and installation.
Ensure professional installation of cables and wires to avoid short cir-
cuits.
No part of the product may be changed or modified in any way. Viola-
tions result in the loss of the device warranty.
Do not expose the equipment to significant physical stress (knocks,
vibrations, etc.). Incorrect handling and bad transport conditions can
lead to damage to the equipment.
The device is not waterproof. Avoid direct contact with water.
The device may only be used within the specified temperature range.
For details, see the technical data at the end of these instructions.
Connections and standards
This device uses Safety Extra Low Voltage (SELV). The circuits of the
zones, the circuits of the switch outputs, and the 12 V power supply of the
ABUS alarm control panels also operate in this voltage range.
SELV is a low electrical current that offers special protection against
based on its low level and insulation compared to
electric shocks
higher voltage circuits.
The PSTN module contains a mix of connections related to alarm systems,
along with telecommunications connections. The typical alarm system con-
nections are designed for Safety Extra Low Voltage (SELV). The telecom-
munication connections are designed for voltages of the telecommunications
network (Telecommunications Network Voltage, TNV).
It is extremely important that the two types of connections are kept
separate. Always use separate cables. Connect the respective
connections with appropriate external connections (such as alarm
Caution!
system connections) or with appropriate telephone connections.
TNV circuits should only be connected by a qualified person in
accordance with local regulations.
Cleaning
5 UK

Publicité

Table des Matières
loading

Table des Matières