Ending/Exiting The Programming Menu - Abus AZWG10020 Instructions D'installation Et De Service

5. Use the letter keys to change the contact name.
6. Use the arrow keys to move the cursor to the right or left.
To delete individual characters, press the CLEAR key.
7. To confirm, press ENT.
To exit, press ESC. The changes are not saved. You can now en-
ter the number of the contact.
8. Use the number buttons to enter the telephone number.
To delete individual characters, press the CLEAR key.
9. Press ENT to confirm the telephone number entered. The display
now shows the contact type.
10. Here you can specify whether the device is to send a voice mes-
sage or a text message to the telephone number.
11. Press an arrow button to select VOICE or TEXT.
12. Confirm with ENT.
13. Repeat steps 3–12 to set the other contacts.
14. Press ESC to return to the main menu.
Example 2: Record voice messages
1. Enter your passcode. Scroll down using the arrow keys or use the
number 2 key to display the Messages menu item.
Press ENT. The display shows "Voice Message".
2. Press ENT to select. The display shows the following:
3. Use the arrow keys to scroll down and select the desired voice
message.
4. Press the record button and then speak clearly into the device.
The device shows how much time has already elapsed.
5. Press the Record button again to stop recording.
6. To play the recorded message, press the ENT key. The voice
message is then played through the integrated loudspeaker.
Press CLEAR to delete the recorded message.
7. Repeat steps 3–6 to record further voice messages.
8. Press ESC to return to the main menu.

11.2 Ending/exiting the programming menu

You must leave the programming menu in order for the device to
work as you have programmed it.
If you are in the programming menu, the device cannot start a
calling operation upon triggering of inputs, for example.
Message 04 Type:
VOICE
↑↓ [ENT] to Select
Messages
Voice Alarm A
►=Play, ●= Record
Record Alarm A
SPEAK NOW...04s
20 UK