Display Options - Abus AZWG10020 Instructions D'installation Et De Service

Transmetteur téléphonique gsm/rtc
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 109
The device is connected to an extension of a private branch exchange in
Germany and is to use vodafone in the UK for "SMS over PSTN". The tele-
phone number to be entered must then correspond to the following structure.
0 0044 7785 1234567
SMS Format
Select the format specified to you by the SMS service center. The available
options are 8N1 and 7E1.
The device can communicate with the SMS service center either
with 7 data bits with even parity and 1 stop bit (7 E 1)
or
with 8 data bits, no parity, and 1 stop bit (8 N 1).
SMS Protocol
Select the protocol specified to you by the SMS service center. The available
options are: TAP or UCP.
Own PSTN Tel No.
Enter the phone number of the analog line.
Some SMS service centers require the calling number before they accept a
processing request for an SMS message. This is also used for clear charg-
ing of SMS messages.
With the UCP protocol, this number is transmitted as part of the SMS mes-
sage.
This number is not transferred with the TAP protocol.
12.3.4

Display Options

Flash On Message
When enabled (ON), the backlight of the display flashes when a remind-
er message (memo) is waiting (default). Playing the reminder message
stops the flashing.
When the function is deactivated (OFF), the backlight does not flash.
Beep On Message
When the function is activated (ON), the device beeps every minute
when a reminder message (memo) is waiting. Playing the reminder
message stops the beeping.
When the function is deactivated (OFF), the device does not beep (de-
fault).
0
access code)
0044
telephone network (00) and
7785
1234567
26 UK
Exchange dial-up prefix (exchange
Dial-up prefix for the international
the country code for the the UK (44)
Network prefix for vodafone UK
Telephone number

Publicité

Table des Matières
loading

Table des Matières