en Cleaning and servicing
A detailed RED Declaration of Conformity can be found
online at www.gaggenau.com among the additional
documents on the product page for your appliance.
BE
ES
HU
SK
5 GHz WLAN (Wi-Fi): For indoor use only.
Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
Cleaning products
You can obtain suitable cleaning products from after-
sales service or the online shop.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Before cleaning, pull out the mains plug or switch
▶
off the fuse in the fuse box.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
WARNING ‒ Risk of burns!
The appliance will become hot during operation.
Allow the appliance to cool down before cleaning it.
▶
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Do not use harsh or abrasive detergents.
▶
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Do not use any special cleaners for cleaning the ap-
▶
pliance while it is hot.
Only use glass cleaners, glass scrapers or stainless
▶
steel care products if recommended in the cleaning
instructions for the relevant part.
Wash sponge cloths thoroughly before use.
▶
Cleaning the stainless steel surfaces
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Page 32
Clean using a sponge cloth and hot soapy water in
2.
the direction of the finish.
Dry with a soft cloth.
3.
Apply a thin layer of the stainless steel cleaning
4.
product with a soft cloth.
Tip: You can obtain stainless steel cleaning products
from after-sales service or the online shop.
32
BG
CZ
FR
HR
MT
NL
FI
SE
2.4 GHz band: 100 mW max.
5 GHz band: 100 mW max.
DK
DE
IT
CY
AT
PL
UK
NO
Cleaning painted surfaces
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Page 32
Clean using a sponge cloth and hot soapy water in
2.
the direction of the finish.
Dry with a soft cloth.
3.
Cleaning aluminium
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Page 32
Clean with a soft cloth and glass cleaner.
2.
Cleaning plastic
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Page 32
Clean with a soft cloth and glass cleaner.
2.
Cleaning glass
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Page 32
Clean with a soft cloth and glass cleaner.
2.
Cleaning controls
WARNING ‒ Risk of electric shock!
Penetrating moisture may cause an electric shock.
Do not use wet sponge cloths.
▶
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Page 32
Clean using a damp sponge cloth and hot soapy
2.
water.
Dry with a soft cloth.
3.
EE
IE
LV
LT
PT
RO
CH
TR
EL
LU
SI