Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en-us
Cleaning and maintenance
Connecting another cooktop to the extractor hood
In order to connect another cooktop to the extractor
hood, run through the direct connection again with the
second cooktop.
1.
Switch off the Wi-Fi on the first cooktop. To do so,
follow the instructions in the user manual for the
cooktop.
2.
Start the connection for the second cooktop, then
start the connection for the cooktop extractor system.
The connection process may take a few minutes. The
cooktop is connected to the cooktop extractor system
once the illuminated ring on the control knob lights up
green.
3.
Switch the Wi-Fi on the first cooktop back on again.
24
Cleaning and maintenance
9
WARNING
C l e a n i n g a n d m a i n t e n a n c e
Risk of burns!
The appliance grows hot during operation. Let
appliance cool down prior to cleaning.
9
WARNING
Risk of electrical shock!
Moisture entering the appliance can cause an
electrical shock. Don't use a high-pressure cleaner
or steam cleaner.
9
WARNING
Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
NOTICE
Surface damage
Do not use these cleaning agents
Caustic or corrosive cleaners
▯
Oven cleaners
▯
Cleaners that are caustic, contain chlorine or are
▯
aggressive
Cleaners containing large proportions of alcohol
▯
Hard, scratchy dish-washing sponges, brushes or
▯
scourers
If such an agent comes into contact with the appliance,
wipe it off immediately with water.
Thoroughly wash out new sponge cloths before using
them.
Note: Only use a minimal amount of water when cleaning
so that no water enters the appliance.
Publicité
Chapitres
Table des Matières
