Connecting Appliances Via The Home Network; Connecting Appliances Directly - Gaggenau VL 414 712 Notice D'utilisation

Connecting appliances via the home
network
If the appliances are connected to each other via your
home network, both the hood controls on the cooktop
and the Home Connect functions can be used to operate
the appliance.
Two appliances can be connected using the Home
Connect app provided that both of them are Home
Connect-compatible.
Refer to the Home Connect documents supplied for more
information.
Establishing a connection via the home network
Open the Home Connect settings menu. ~ "Open
1.
or close the Home Connect settings menu"
on page 16
2.
Log in to the home network manually or automatically;
see ~ "Manual Registration in the Home
Network" on page 18 or ~ "Logging in to your
home network automatically (WPS)" on page 18.
Once the extractor hood is connected to your home
network, you can connect to the cooktop via the Home
Connect app. To do this, follow the instructions on
your mobile device.
Connecting another cooktop to the extractor hood
1.
Connect both cooktops to Home Connect.
2.
Connect the cooktop extractor system to Home
Connect.
3.
In the Home Connect app, connect the first cooktop
to the cooktop extractor system.
4.
In the Home Connect app, connect the second
cooktop to the cooktop extractor system.
5.
Turn the control knob for the cooktop extractor system
to the h position. Only then is the operation via the
cooktop possible
Connecting the cooktop extractor system to the cooktop

Connecting appliances directly

If the appliance is connected directly to one or several
cooktops, it can no longer be connected to your home
network. The appliance will function as an extractor hood
that is not connected to the network and you can
continue to operate it via the control panel.
Before connecting the appliances, reset all existing
connections to your home network or other appliances.
Establishing a direct connection
Make sure that the cooktop is switched on and is in
search mode. Search mode means that the connection
process on the cooktop has been started.
To do this, refer to the section entitled "Connecting to the
extractor hood" in the user manual for your cooktop.
Open the Home Connect settings menu. ~ "Open
1.
or close the Home Connect settings menu"
on page 16
2.
Turn the control knob clockwise to position 2.
After around 5 seconds, the illuminated ring around
the control knob flashes blue and yellow alternately.
The cooktop is connected to the extractor hood once
the illuminated ring on the control knob lights up
green.
Close the Home Connect settings menu. ~ "Open
3.
or close the Home Connect settings menu"
on page 16
The illuminated ring on the control knob goes out.
4.
Turn the control knob for the cooktop extractor system
to the h position. Only then is the operation via the
cooktop possible
Direct connection unsuccessful
If, after around 30 seconds, a connection could not be
established, the illuminated ring around the control knob
lights up red. Turn the control knob to another position
and then back to position 2.
The illuminated ring around the control knob lights up
blue. After around 5 seconds, the illuminated ring around
the control knob flashes blue and yellow. The appliance
is trying to establish a connection again.
en-us
23