Installing The Appliance; Connecting The Appliance - Gaggenau AC250121 Notice D'utilisation

Installing the appliance

m
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
m
Warning – Risk of injury!
Risk of trapping body parts when opening and closing
the hinges. Keep your hands away from the hinges.
1 Tilt the transport lock slightly upwards and carefully
pull it upwards and out at an angle.
2 Remove residues from polystyrene from the interior
of the appliance.
3 Remove the grease filter.
4 Fully insert the appliance into the cut-out until you
hear the mounting brackets engage.
5 Carefully screw in diagonally opposite screws.
Note: Tighten the screws one at a time so that the
appliance is not wedged in the cut-out.
6 Carefully tighten screws in succession until the
appliance is flush-mounted on the ceiling.
Note: Do not overtighten the screws to ensure that
the appliance is not damaged.

Connecting the appliance

1 Press together the cable duct at the sides and
remove it.
2 Disconnect the cable at the appropriate point.
3 Undo the opposite screws to loosen the fan box.
Installation
en
49