Removing The Appliance - Gaggenau AC250121 Notice D'utilisation

Removing the appliance

m
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
m
Warning – Risk of injury!
Risk of trapping body parts when opening and closing
the hinges. Keep your hands away from the hinges.
1 Disconnect the appliance from the power supply.
2 Swing down the filter cover.
3 Remove the metal grease filters.
4 Press together the cable duct at the sides and
remove it.
5 Undo the screws on the hinges up to approx. 7 mm.
Note: Do not loosen them fully.
6 Unhook and remove the filter cover.
7 Loosen the screws on the fan box, remove the
ducting and pull out the mains plug. Then screw the
fan box firmly back in place.
8 Push the removal slide inwards to loosen the
mounting brackets.
9 Release the appliance slowly at an angle.
Installation
en
51