Intensive Setting; Intermittent Ventilation; Automatic Mode - Gaggenau AC250121 Notice D'utilisation

Operating the appliance
en
LED display
LED Explanation
1 Fan setting 1
2 Fan setting 2
3 Fan setting 3
4 Intensive mode 1
5 Intensive mode 2
6 Automatic mode/intermittent ventilation
7 Home Connect
8 Infrared receiver
Setting the fan
Switching on
Press the # button.
1
The fan starts at fan setting 2.
Press the @ or A button to set a different fan
2
setting.
The corresponding LEDs light up on the appliance.
Switching off
Press the # button.

Intensive setting

You can use the intensive setting if there is a large build-
up of odours and fumes/vapours.
Switching on
Press the # button.
1
The fan starts at fan setting 2.
Press the @ button twice in order to set intensive
2
mode 2.
Note: Intensive mode 1 is only available via the
Home Connect app.
The corresponding LEDs light up on the appliance.
Note: After approx. 6 minutes, the extractor hood
automatically switches back to fan setting 3.
34

Intermittent ventilation

Switching on
With intermittent ventilation, the ventilation system
switches itself off for approximately 6 minutes every
hour.
Note: You can custom configure the time and fan
setting in the Home Connect app.
μ
Press the to switch on intermittent ventilation.
LED 6 flashes continuously, the LED for the selected
fan setting lights up on the appliance.
When the ventilation time ends, the LED for the fan
setting you have selected goes out. LED 6 continues to
flash.
Switching off
μ
Press the button.

Automatic mode

Switching on
Press the # button.
1
The fan starts at fan setting 2. The corresponding
LEDs light up.
Press the r button.
2
LED 6 on the appliance lights up and the optimum
fan setting is set automatically via a sensor.
Switching off
Switch off automatic mode using the r button.
The fan switches itself off automatically if the sensor
detects no further change in the air quality of the room.
Automatic mode can run for a maximum of 4 hours.