O Perating Modes; Exhaust Air Mode; Circulating-Air Mode; O Perating The Appliance - Gaggenau AC250121 Notice D'utilisation

Masquer les pouces Voir aussi pour AC250121:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

O perating modes

Ç
E xhaust air mode
O p e r a t i n g m o d e s
The air which is drawn in is cleaned
by the grease filters and conveyed to
the exterior by a pipe system.
Note: The exhaust air must not be conveyed into a
functioning smoke or exhaust gas flue or into a shaft
which is used to ventilate installation rooms which
contain heat-producing appliances.
Before conveying the exhaust air into a non-
functioning smoke or exhaust gas flue, obtain the
consent of the heating engineer responsible.
If the exhaust air is conveyed through the outer wall,
a telescopic wall box should be used.

Circulating-air mode

The air which is drawn in is cleaned by
the grease filters and an activated
carbon filter and conveyed back into
the kitchen.
Note: To bind odours in circulating-air mode, you must
install an activated carbon filter. The different options
for operating the appliance in circulating-air mode can
be found in the brochure. Alternatively, ask your dealer.
The required accessories are available from specialist
retailers, from customer service or from the Online
Shop.

O perating the appliance

1
T hese instructions apply to several appliance variants. It
O p e r a t i n g t h e a p p l i a n c e
is possible that individual features are described which
do not apply to your appliance.
If your appliance has Home Connect, more functions
are only available in the Home Connect app.
Note: Switch on the extractor hood when you start
cooking and switch it off again several minutes after you
have finished cooking. This is the most effective way of
removing the kitchen fumes.

Remote control

Use the remote control to set and adjust the various
different functions of your appliance.
Note: Align the remote control as precisely as possible
to the infrared receiver for the LED display.
Symbol Explanation
#
On/off
r
Automatic mode/climateControl sensor
@
Increase the fan setting
A
Decrease the fan setting
μ
Intermittent ventilation
·
Home Connect
œ
Resetting the filter saturation indicator
Operating modes
en
33

Publicité

Table des Matières
loading

Table des Matières