en Installation instructions
Insert the appliance into the cut-out until you hear
1.
the mounting brackets engage.
Carefully screw in diagonally opposite screws.
2.
5
Tighten the screws one at a time so that the appli-
ance is not wedged in the cut-out.
Note: To ensure that the appliance is not damaged,
3.
do not overtighten the screws.
Carefully tighten screws in succession until the ap-
pliance is flush-mounted on the ceiling.
Connecting the appliance
Press together the cable duct at the sides and re-
1.
move it.
38
Disconnect the cable at the appropriate point.
2.
Undo the opposite screws to loosen the fan box.
3.
T 20
Turn the fan box into the correct position according
4.
to the installation situation.