Gaggenau AC250121 Notice D'utilisation Et De Montage page 29

Notes
Please note the safety precautions in this instruction
¡
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 22
Operating the appliance on the appliance itself al-
¡
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
In networked standby mode, the appliance requires
¡
a maximum of 2 W.
If you need your device's MAC address to connect
¡
to your home network, you can find this next to the
rating plate → Page 33 inside the appliance. To do
this, Remove the filter → Page 31.
Automatically connecting the
appliance to the WLAN home network
(Wi-Fi)
If your router has a WPS function, you can connect the
appliance to your WLAN home network (Wi-Fi) automat-
ically.
Note: The appliance cannot be switched on during the
connection process. Press ⁠
Requirements
Wi-Fi on the router is activated.
¡
The appliance receives signals from the WLAN home
¡
network (Wi-Fi) at its installation location.
The Home Connect app is installed on your mobile
¡
device.
The appliance and the light are switched off.
¡
Press and hold the ⁠ button until LED 7 flashes in
1.
the LED display.
Press ⁠ .
2.
LED 1 and LED 7 flash in the LED display.
a
Press the WPS button on the router within the next
3.
2 minutes.
If the connection has been established, the appli-
a
ance automatically connects to the Home Connect
app. LED 3 and LED 7 flash in the LED display.
If no connection can be established, the appliance
4.
automatically switches to the manual connection to
the home network, LED 2 and LED 7 flash in the
LED display. Log the appliance manually into the
home network or press ⁠
gin.
On your mobile device, follow the instructions for
5.
automatic network login.
The login process is complete when LED 7 stops
a
flashing and remains continuously lit.
Manually connecting the appliance to
the WLAN home network (Wi-Fi)
Note: The appliance cannot be switched on during the
connection process. Press ⁠
Requirement: The appliance and the light are switched
off.
Press and hold the ⁠ button until LED 7 flashes in
1.
the LED display.
to cancel the process.
in order to restart the lo-
to cancel the process.
Press ⁠ twice to start logging into your home net-
2.
work manually.
LED 2 and LED 7 flash in the LED display.
a
Follow the instructions in the app.
3.
If the connection has been established, the appli-
a
ance automatically connects to the Home Connect
app. LED 3 and LED 7 light up in the LED display.
On your mobile device, follow the instructions for
4.
manually logging into your network.
The login process is complete when LED 7 stops
a
flashing and remains continuously lit.
Connecting the appliance to the
Home Connect app
Requirements
The Home Connect app is installed on your mobile
¡
device.
The Home Connect app is opened.
¡
Press and hold the ⁠ button until LED 3 and LED 7
1.
flash in the LED display.
Follow the instructions for the Home Connect app
2.
on the mobile device.
The login process is complete when LED 7 stops
a
flashing and remains continuously lit.
Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of op-
timisation, troubleshooting or security updates.
To do this, you must be a registered Home Con-
nect user, have installed the app on your mobile device
and be connected to the Home Connect server.
As soon as a software update is available, you will be
informed via the Home Connect app and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start in-
stalling it via the Home Connect app if you are in your
local area network. The Home Connect app will inform
you once installation is successful.
Notes
You can continue to use your appliance as normal
¡
while updates are downloading. Depending on your
personal settings in the app, software updates can
also be set to download automatically.
We recommend that you install security updates as
¡
soon as possible.
Resetting the connection
Saved connections to the home network and to
Home Connect can be reset.
Press and hold ⁠ and ⁠ until LED 7 goes out in the
▶
LED display.
An audible signal sounds.
a
Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Home Connect en
29