Exiting The Home Connect Settings Menu; Connecting The Appliance To Your Home Network (Lan) - Gaggenau VL 414 712 Notice D'utilisation

2.
Press the WPS button on the router within the next 2
minutes.
Following successful connection to the router, the
illuminated ring around the control knob lights up
green for around 3 seconds. The illuminated ring
around the control knob then flashes blue and white
alternately. The appliance is now ready to connect to
your mobile device.
3.
Launch the Home Connect app on your mobile device
and follow the instructions for automatic network
login.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green. If the illuminated ring around the
control knob lights up red, it was not possible to
establish a connection.
4.
To save the connection, exit the Home Connect
settings menu.
5.
After successfully connecting, push in the control
knob and turn it counterclockwise to the h position.
Otherwise, it is not possible to operate the appliance
using the Home Connect app.
Connection to the router unsuccessful
1.
If a connection could not be established, check the
router, and turn the control knob to another position
and then back to position 1.
The illuminated ring around the control knob lights up
blue. After around 5 seconds, the illuminated ring
around the control knob flashes blue and yellow.
2.
Switch to the general settings menu of your mobile
device and start the Wi-Fi connection again.
Connection to the mobile device unsuccessful
1.
If a connection could not be established, turn the
control knob to another position and then back to
position 1.
The illuminated ring around the control knob lights up
blue. After around 5 seconds, the illuminated ring
around the control knob flashes blue and white.
2.
Launch the Home Connect app on your mobile device
and follow the instructions for automatic network
login.
Connecting more mobile devices to the same Home
Connect account
In the Home Connect app, you can connect more mobile
devices to your appliance.
Connecting more mobile devices to another Home
Connect account
Prerequisite: A mobile device is connected to the
appliance. The appliance can be found in the Home
Connect settings menu.
1.
Turn the control knob to another position and then
back to position 1.
The illuminated ring around the control knob flashes
blue and white. The appliance is now ready to connect
to another mobile device.
2.
Launch the Home Connect app on your mobile device
and follow the instructions for automatic network
login.
The appliance is available in the app on the mobile
device once the illuminated ring around the control
knob lights up green.
Exiting the Home Connect settings
menu
1.
Carry out the following operating steps one after the
other without interruption.
Close the Home Connect settings menu. ~ "Open
2.
or close the Home Connect settings menu"
on page 16
The illuminated ring on the control knob goes out.
Connecting the appliance to your home
network (LAN)
The appliance must be connected to your home network
using a LAN cable.
1.
Connect the LAN cable (RJ45) to the router and the
appliance.
Reset the Home Connect connections.~ "Resetting
2.
the Home Connect connections" on page 20
3.
Remain in the Home Connect settings menu.
Turn the control knob to <.
4.
The illuminated ring around the control knob flashes
blue and white alternately.
5.
Start the Home Connect app on the mobile device and
follow the instructions.
6.
As soon as the network connection is established, exit
the Home Connect settings menu.~ "Exiting the
Home Connect settings menu" on page 19
7.
Push in the control knob and turn it counterclockwise
to the h position. Otherwise, it is not possible to
operate the appliance using the Home Connect app.
en-us
Home Connect
19