Basic Settings; Exiting The Basic Settings Menu And Saving The Settings - Gaggenau VL 414 712 Notice D'utilisation

Masquer les pouces Voir aussi pour VL 414 712:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Basic Settings

Q
B a s i c s e t t i n g s
T he appliance has various basic settings. You can adapt
these basic settings to suit your individual requirements.
To access the basic settings:
1.
Carry out the following operating steps one after the
other without interruption.
2.
Push in the control knob and turn it counterclockwise
to the h position. Keep the control knob pressed in.
3.
Turn the control knob clockwise to position 1. Keep
the control knob pressed in.
4.
Turn the control knob counterclockwise to position 0.
The illuminated ring around the control knob lights up
yellow.
5.
Select the required setting using the control knob.
After approx. 5 seconds, the illuminated ring for the
control knob lights up green. Exit the basic settings to
save the setting you require.
6.
To change the setting back, push in the control knob
and turn it counterclockwise to position 0, and use the
control knob to select the required setting.
The control knob lights up yellow.
Control
Function
knob posi-
tion
<
Color selection for
the illuminated
ring around the
control knob
1
Fan setting 1 for
intermittent venti-
lation
2
Fan setting 2 for
intermittent venti-
lation
3
Fan setting 3 for
intermittent venti-
lation
*Basic setting
Illuminat-
Illuminat-
ed ring
ed ring
color:
color: Yel-
Green
low
Orange*
Orange
(dark)
Selected* Not
selected
Selected
Not
selected*
Selected
Not
selected*
Control
Function
knob posi-
tion
Ž
Run-on function
μ
Noise reduction
*Basic setting
Exiting the basic settings menu and
saving the settings
1.
Carry out the following operating steps one after the
other without interruption.
2.
Push in the control knob and turn it counterclockwise
to the h position. Keep the control knob pressed in.
3.
Turn the control knob clockwise to position 1. Keep
the control knob pressed in.
4.
Turn the control knob counterclockwise to position 0.
The illuminated ring around the control knob goes out.
en-us
Basic settings
Illuminat-
Illuminat-
ed ring
ed ring
color:
color: Yel-
Green
low
Activated* Deacti-
vated
Activated
Deacti-
vated*
15

Publicité

Table des Matières
loading

Table des Matières