Operating Modes; Familiarising Yourself With Your Appliance; Before Using For The First Time; Basic Operation - Gaggenau AC270101 Notice D'utilisation Et De Montage

Clean or replace the filters at regular intervals.
The effectiveness of the appliance is increased.
Put the cooking lid on.
The cooking vapours and condensation are re-
duced.

Operating modes

Air recirculation mode
The air which is drawn in is cleaned by the grease fil-
ters and an odour filter, and conveyed back into the
room.
To bind odours in circulating-air mode,
you must install an odour filter. The dif-
ferent options for operating the appli-
ance in circulating-air mode can be
found in our catalogue. Alternatively,
ask your dealer. The required accessor-
ies are available from specialist retail-
ers, from customer service or from the
Online Shop.
Familiarising yourself with your
appliance
Familiarise yourself with the parts of your appliance.
Controls
Use the remote control to set all of the functions of
your appliance.
Tip: Align the remote control as precisely as possible
to the infrared receiver for the LED display.
Switch the appliance on or off
Switch on automatic mode
1 Depending on the appliance specifications
1
Start up the appliance
Shut down the appliance
Increase the fan setting
Decrease the fan setting
Switch the lighting on or off
Switch Home Connect on or off
Reset the filter saturation indicator
1 Depending on the appliance specifications
LED display
Die LED-Anzeige zeigt eingestellte Werte und Funk-
tionen.
1 2 3 4 5
Fan setting 1/grease filter saturation display
1
Fan setting 2/odour filter saturation indicator
2
Fan setting 3
3
Intensive mode 1
4
Intensive mode 2
5
Automatic mode
6
ilation
Home Connect
7
Infrared receiver
8
1 Depending on the appliance specifications

Before using for the first time

Configure the settings for initial start-up. Clean the ap-
pliance and accessories.

Basic operation

You can find out everything you need to know about
operating your appliance here.
Switching on the appliance
Requirement: Align the remote control as precisely as
possible to the infrared receiver for the LED display.
Press ⁠ to switch on the appliance.
▶
The appliance starts at fan setting 2.
a
The LED for fan setting 2 lights up in the LED dis-
a
play.
The appliance moves to the last saved position.
a
Operating modes en
6 7 8
1
/fan run-on time/interval vent-
27