Preventing Material Damage; Environmental Protection And Saving Energy; Disposing Of Packaging - Gaggenau AC270101 Notice D'utilisation Et De Montage

Masquer les pouces Voir aussi pour AC270101:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

en Preventing material damage
Repairs to the appliance should only
be carried out by trained specialist
staff.
Improper repairs are dangerous.
¡
Repairs to the appliance should only
be carried out by trained specialist
staff.
Only use genuine spare parts when re-
pairing the appliance.
If the power cord of this appliance is
damaged, it must be replaced by
trained specialist staff.
An ingress of moisture can cause an elec-
¡
tric shock.
Before cleaning, pull out the mains
plug or switch off the fuse in the fuse
box.
Do not use steam- or high-pressure
cleaners to clean the appliance.
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic
cleaning agents in conjunction with alu-
minium parts in the interior of the appli-
ance may cause explosions.
Never use highly caustic alkaline or
highly acidic cleaning agents. In partic-
ular, do not use commercial or indus-
trial cleaning agents in conjunction with
aluminium parts, e.g. grease filter on
extractor hoods.

Preventing material damage

Follow these instructions to prevent material damage to
your appliance, accessories or other objects in your kit-
chen.
General
Follow these instructions when using the appliance.
ATTENTION!
Condensate may cause corrosion damage.
¡
To prevent condensation from building up, switch
on the appliance during cooking.
If moisture gets into the controls, this may result in
¡
damage.
Never clean controls with a wet cloth.
Incorrect cleaning damages the surfaces.
¡
Follow the cleaning instructions.
Do not use harsh or abrasive detergents.
Clean stainless steel surfaces in the direction of
the finish only.
Never clean controls with stainless steel clean-
ers.
26
Condensation that flows back in may damage the
¡
appliance.
The air extraction duct must be installed with a
gradient of at least 1° from the appliance.
If you put incorrect stress on the design elements,
¡
they may break off.
Do not pull design elements.
Do not place objects on the design elements or
hang objects from them.
Leaking batteries may damage the remote control.
¡
Remove the batteries if you are not using the re-
mote control.
Safely dispose of the empty or defective batteries
in an environmentally friendly manner.
There is a risk of surface damage if you do not peel
¡
off the protective film.
Remove the protective film from all parts of the
appliance before using for the first time.
Environmental protection and
saving energy
Help protect the environment by using your appliance
in a way that conserves resources and by disposing of
reusable materials properly.

Disposing of packaging

The packaging materials are environmentally compat-
ible and can be recycled.
Sort the individual components by type and dispose
of them separately.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
Saving energy
If you follow these instructions, your appliance will use
less power.
Ensure that there is sufficient ventilation when cook-
ing.
The appliance works more efficiently and with fewer
operating noises.
Adjust the fan speed to the amount of steam pro-
duced during cooking.
The lower the fan speed, the less energy is con-
sumed.
Only use intensive mode when required.
If cooking produces large amounts of steam, select a
higher fan speed in good time.
The odours are distributed around the room less.
Switch the appliance off when you are not using it.
The appliance does not consume any energy.
Switch off the lighting if you no longer require it.
The lighting does not consume any energy.

Publicité

Table des Matières
loading

Table des Matières