Causes Of Damage; Protecting The Environment; Saving Energy; Environmentally-Friendly Disposal - Gaggenau AW 442 720 Notice D'utilisation

Causes of Damage

NOTICES:
▯
Risk of damage due to corrosion. Always turn
appliance on when cooking to avoid condensation
buildup. Condensation can lead to corrosion
damages.
▯
Risk of damage due to ingress of humidity into the
electronic circuitry. Never clean operator controls
with a wet cloth.
▯
Surface damage due to incorrect cleaning. Clean
stainless steel surfaces in the grind direction only.
Do not use any stainless steel cleaners for operator
controls.
▯
Surface damage due to strong or abrasive cleaning
agents. Never use strong and abrasive cleaning
agents.
▯
Risk of damage from condensation back flow.
Install exhaust vent at a slight downward slope away
from the appliance (1° slope).
8

Protecting the environment

Your new appliance is energy-efficient. Here you can
find tips on how to save even more energy when using
the appliance, and how to dispose of your appliance
properly.

Saving energy

▯
Only switch the fan on when necessary. If you are
just warming something up briefly that does not
have a strong smell, you can also leave the fan
switched off.
▯
Select a fan level that is appropriate for the
circumstances.
▯
Switch the ventilation off after cooking.
▯
Clean the grease filter regularly; this increases the
effectiveness of the ventilation.
▯
Switch the lighting of the appliance off when it is
not being used.

Environmentally-friendly disposal

Unpack the appliance and dispose of the packaging in
line with environmental requirements.