Lighting; Audible Signal; Cleaning And Maintenance; Cleaning Agents - Gaggenau AW24.120 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Lighting

The lighting can be switched on and off independently
of the ventilation.
@
Press the
button.
Setting the brightness
@
Press and hold the
button until the desired
brightness is reached.

Audible signal

Switching on the audible signal
When the fan is switched off, press and hold the
Ž
and
buttons at the same time for approx. 3
seconds. An audible signal sounds. The audible signal
is switched on.
Switching off the audible signal
When the fan is switched off, press and hold the
Ž
and
buttons at the same time for approx.
3 seconds. An audible signal sounds. The audible
signal is switched off.
18
All manuals and user guides at all-guides.com

Cleaning and maintenance

m
The appliance will become hot during operation,
especially near the bulbs. Allow the appliance to cool
down before cleaning.
m
Penetrating moisture may result in an electric shock.
Clean the appliance using a damp cloth only. Before
cleaning, pull out the mains plug or switch off the
circuit breaker in the fuse box.
m
#
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
m
Components inside the appliance may have sharp
edges. Wear protective gloves.
#

Cleaning agents

Observe the information in the table to ensure that the
different surfaces are not damaged by using the
wrong type of cleaning agent. Do not use
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the
cleaning agents.
Area
Stainless steel
Painted surfaces
Aluminium and
plastic
Risk of burns!
Risk of electric shock!
Risk of electric shock!
Risk of injury!
harsh or abrasive cleaning agents,
cleaning agents with a high concentration of
alcohol,
hard scouring pads or sponges,
high-pressure cleaners or steam cleaners.
Cleaning agents
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth.
Clean stainless steel surfaces in the
direction of the grain only.
Special stainless steel cleaning
products are available from our
after-sales service or from specialist
retailers. Apply a very thin layer of the
cleaning product with a soft cloth.
Hot soapy water:
Clean using a damp dish cloth and dry
with a soft cloth/towel.
Do not use any stainless steel
cleaners.
Glass cleaner:
Clean with a soft cloth.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Aw230120

Table des Matières