Intensive Setting; Run-On Function; Interval Ventilation; Lighting - Gaggenau AL400 Notice D'utilisation

Masquer les pouces Voir aussi pour AL400:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25

Intensive setting

You can use the intensive setting if there is a large
build-up of odours and fumes/vapours.
#
1
Press the
button.
The fan starts at level 2.
Ž
2
Press the
button.
The intensive setting is activated.
Note: The running time of the intensive setting is
6 minutes. Once this time has elapsed, the
appliance switches back to the previously
selected fan setting.
#
3
Press the
button or the button for another fan
speed.
The intensive setting is deactivated.

Run-on function

Switching on
The run-on function can be activated for any fan
setting.
1
Select fan setting 1, 2, 3 or
ž
2
Press the
button.
The run-on time for all fan settings is six minutes.
Once this time has elapsed, ventilation switches
off automatically. If the lighting is switched on, it
remains on once the run-on time has elapsed.
Switching off
ž
Press the
button or the button for another fan
setting.
The run-on function stops before the remaining run-on
time elapses.

Interval ventilation

Switching on
With interval ventilation, the ventilation switches on
automatically for six minutes every hour.
1
Press fan setting 1, 2 or 3.
ž
2
Press the
button twice.
ž
The
button and the button for the fan setting
selected flash alternately. The interval ventilation
is switched on.
Switching off
#
Press the
button.
The interval ventilation is switched off.
20
Ž
.

Lighting

The lighting can be switched on and off independently
of the ventilation.
@
Press the
button.
Setting the brightness
@
Press and hold the
button until the desired
brightness is reached.

Saturation display

After an operating time of 30 hours, the saturation
œ
indicator
for the grease filter flashes.
When this happens, do not delay cleaning the
metal grease filters. For instructions on how to
clean the metal grease filters, please refer to the
section
Cleaning and maintenance
While the saturation indicator is flashing, you can
œ
reset the
button.

Safety shut-off

For your safety, the appliance has a safety shut-off
function. The lighting switches off after 12 hours and
the fan after 4 hours if the appliance is not operated
during this time.
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Al442100Al400121Al 400 série

Table des Matières