What To Do In The Event Of A Fault; Malfunction Table - Gaggenau Al400 Notice D'utilisation

Attaching the filter cover
1 Take hold of the side of the filter cover with both
hands.
2 Slide the filter cover onto the bolts of the holder
and lift it forwards until it snaps into place.

What to do in the event of a fault

Malfunctions often have simple explanations. Please read
the following notes before calling the after-sales service.
m
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a
licensed technician (electrician).
m
Risk of injury!
The light emitted by LED lights is very dazzling, and
can damage the eyes (risk group 1). Do not look
directly into the switched on LED lights for longer
than 100 seconds.

Malfunction table

Problem Possible cause Solution
The appliance The plug is not
does not work plugged in.
Power cut
Faulty fuse
Appliance does Filter cover not
not switch on. closed.
The button illu- The control unit
mination does is faulty.
not work.
The lighting The bulbs are
does not work. faulty.
œ
The filter is
The button
dirty.
flashes.
The appliance The network-
is not working, cable plug is
all the buttons not plugged
are flashing into the mains
The circuit
breaker is faulty
One of the com-
ponents in the
appliance has
broken
--------
Connect the appliance
to the electricity supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse
for the appliance is OK
Close the filter cover
fully.
Call the after­sales ser-
vice.
Call the after­sales ser-
vice.
Clean the filter – see
Cleaning and
section
maintenance
.
Check that the network
cables of all the appli-
ances are connected
Look in the fuse box and
check that the circuit
breakers for all the
appliances are in work-
ing order
Call the after-sales
service
23