Saturation Notification; Cleaning And Maintenance - Gaggenau AI 230 700 Notice D'utilisation Et De Montage

Saturation notification

After 30 hours of operation, the saturation display
of the grease filter blinks.
▯
At the latest now the metal mesh grease filter
should be cleaned. For instructions on how to
clean the metal mesh grease filter, please see

Cleaning and maintenance

the chapter about
▯
While the saturation display is blinking, it can be
œ
reset with the button.
10
Cleaning and maintenance
œ
9
WARNING
Risk of burns
The appliance will become hot when in use,
.
especially in the area surrounding the bulbs.
Let cool before cleaning.
9
WARNING
Risk of electric shock
Penetrating damp can cause electric shock.
Only clean appliance with a damp cloth. Prior
to cleaning, pull the plug or flip the breaker in
the fusebox.
9
WARNING
Risk of electrical shock
Moisture entering the appliance can cause an
electrical shock. Don't use a high-pressure
cleaner or steam cleaner.
9
WARNING
Risk of injury
Components inside the appliance may have
sharp edges. Wear protective gloves.
Cleaning agents
To ensure that the different surfaces are not
damaged by using the wrong cleaning agent, follow
the information in the table. Do not use:
▯
Harsh or abrasive cleaning agents,
▯
Cleaning agents with a high alcohol content,
▯
Hard scouring pads or cleaning sponges,
▯
High-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with
the cleaning agents.