Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Collecting Container
Overview
4
Removing / Inserting the Collecting Container
•
Removing: Hold the device with the collecting container (4) pointing downwards.
Press the release button (3) of the collecting container and remove the main unit (8)
from the collecting container.
•
Inserting: On the bottom of the main unit there is a locking lug. Plug this into the
associated slot in the collecting container. Then press the two parts of the device
together at the top until the locking mechanism is heard to lock in place. Then check
whether the collecting container is fi tted in place properly.
Use
CAUTION!
■
Never hold the nozzles close to parts of your body or animals during use and do not
place your hands inside the nozzles. They could become stuck to the device/injured.
Should the vacuum cleaner become stuck, switch the device off immediately.
■
Switch on the device only once you have ensured that the suction nozzle, the coll-
ecting container, the insert and the fi lter have been inserted correctly. The silicone
plug (16) of the insert must be plugged in the opening as far as it will go!
■
Always switch the device off fi rst before you replace a nozzle or attach or remove
any other accessories!
■
On no account should the device be used to suck up the following:
– Glowing ash, cigarette ends, matches, etc.
– Infl ammable or explosive substances
– Very fi ne dust (e. g. concrete dust), ash or toner
– Pointed, hard objects such as large shards of glass
■
Empty and clean the collecting container after every use or when the maximum fi ll level
(marking) has been reached (see the "Cleaning the Device and Accessories" chapter).
IMPORTANT: Do not overfi ll the collecting container; no liquid may get into the
rectangular ventilation opening in the insert!
■
Switch the device off after each surface has been cleaned as this will considerably
increase the operating time on each battery charge.
22
15
16
17
4 Collecting container
15 Insert
16 Filter
8 Main unit
17 Silicone plug
8
Publicité
Chapitres
Table des Matières
