De Dietrich 7654 Guide D'utilisation page 224

5
•
CARE
When the oven is cool, use a
damp cloth to remove the white
ashes. The oven is clean again and
r e a d y f o r
operations.
SELF CLEANING WITH DELAYED
START
Follow the instructions described in
the previous section.
- Select the end time symbol (delayed
start) and confirm.
- Set the pyrolysis end time you want
with the control knob and confirm.
After these steps, the oven switches
to standby and the start of pyrolysis
is delayed so that it finishes at the
programmed time.
When your pyrolysis is complete,
switch your oven off by pressing the
key.
f u r t h e r c o o k i n g
REPLACING THE LIGHT BULB
Warning
Make sure
disconnected from the power before
replacing the bulb in order to avoid
the risk of electric shock. Carry out
the operation when the appliance has
cooled.
Bulb specification:
25 W, 220-240 V~, 300°C, G9.
You can replace the bulb yourself.
Unscrew the view port and remove the
bulb (use a rubber glove, which will make
it easier to remove). Insert the new bulb
and replace the view port.
34
the appliance is