Assembly - DS Produkte C-320-70 Mode D'emploi

Tile / brush nozzle

Assembly

PLEASE NOTE!
■ Before you attach or detach any accessories, ensure that the device is not connect-
ed to the mains power.
Inserting/removing the suction hose
Inserting / removing the telescopic tube
Adjusting the length of the telescopic tube
A
Mounting / removing suction nozzles
• Insert the free end of the telescopic tube as far as it will go into one of the suction
nozzles supplied. At the same time twist the nozzle gently backwards and forwards.
• For greater fl exibility the suction nozzles can also be connected directly to the suc-
tion hose without using the telescopic tube.
• To remove a suction nozzle simply pull it out.
Turn the end piece in the direction of the arrow to convert the tile
nozzle into a brush nozzle:
• The tile nozzle is suitable for cushions, cleaning the inside of
passenger vehicles as well as all nooks and crannies that can't
be reached with other nozzles.
• The brush nozzle is suitable for all uneven objects, furniture,
lamps, profi ling strips and skirting boards, window sills etc.
• Insert the connection piece of the suction hose in the
suction opening on the device and turn it slightly clockwise.
It must audibly lock into place.
• To remove the suction hose turn it slightly anticlockwise
and pull the hose out at the same time.
• Insert the open end of the handle into the corresponding
opening of the telescopic tube. At the same time twist the
handle gently backwards and forwards. Afterwards, check
the connection for secure seating.
• To remove the telescopic tube, pull it out of the handle.
• Pull the slider (A) on the telescopic tube down and set the
desired length.
• Release the slider and move the tube forward until it locks
into place.
19 EN