Assembly; Unpacking The Product Contents; Inserting/Removing The Hose; Inserting/Removing The Telescoping Tube - DS Produkte EV-820-S07 Mode D'emploi

Assembly

Unpacking the product contents

ATTENTION!
❐ Risk of suffocation! Keep the packaging material away from children and animals.
❐ Always turn off the vacuum cleaner fi rst before changing the nozzles.
• Unpack all parts and make sure that the scope of delivery is complete (see chapter
"Product contents and device overview") and check for any damages from transport.
If you identify damages to the device or accessories, do not use them (!), instead
contact our customer service centre.

Inserting/removing the hose

Inserting/removing the telescoping tube

Adjusting the length of the telescoping tube

Mounting/removing suction nozzles

• Insert the open end of the telescoping tube in one of the enclosed suction nozzles
up to the stop. Turn the nozzle back and forth slightly in the process.
• The suction nozzles can also be attached directly to the suction hose for more fl ex-
ibility.
• To remove a suction nozzle pull it off.
09303_de-gb-fr-nl_V0.indb 20 09303_de-gb-fr-nl_V0.indb 20
• Insert the suction hose connector into the suction opening
on the dust bin. It must audibly lock into place.
• To remove the suction hose push the button on the con-
nector and pull the suction hose out.
• Insert the open end of the handle into the corresponding
opening on the telescoping tube. In the process, turn the
handle back and forth somewhat. Check to make sure
that the connection is secure.
• To remove the telescoping tube pull it off of the handle.
• Push the slider on the telescoping tube down and set the
desired length.
• Release the slider and move the tube forward until it locks
into place.
20
02.10.2014 12:38:32 02.10.2014 12:38:32