Prior To Fi Rst Use; Assembly; Inserting/Removing The Hose; Inserting/Removing The Telescoping Tube - DS Produkte ZW-9021-E085 Mode D'emploi

Cushion nozzle
Prior to fi rst use
ATTENTION!
❐ Risk of suffocation! Keep the packaging material away from children and animals.
• Unpack all parts and make sure that the scope of delivery is complete (see chapter
"Product contents and device overview") and check for any damages from transport.
If you identify damages to the components, do not use them (!), instead contact our
customer service centre.
• If necessary, remove any piece of paper or sticker etc. from the dust bin. In chapter
„Cleaning the Device" you will fi nd instructions on how to remove and open the dust bin.

Assembly

ATTENTION!
❐ Make sure that the device is not connected to the power supply before you attach or
remove any accessories.

Inserting/Removing the Hose

Inserting/removing the telescoping tube

All manuals and user guides at all-guides.com
The cushion nozzle is suitable for cleaning sensitive
objects and cushions, e.g. lamp shades, sofas etc.
• Connect the suction hose connection piece to the suction
intake opening on the dust container (see arrow) and turn
it in a clockwise direction until it engages.
• To remove the suction hose, turn the suction intake ope-
ning in an anticlockwise direction and pull it out of the dust
container.
• Insert the open end of the handle into the corresponding
opening on the telescoping tube. In the process, turn the
handle back and forth somewhat. Check to make sure
that the connection is secure.
• To remove the telescoping tube pull it off of the handle.
24