Before Fi Rst Use; Mounting And Removing Accessories - DS Produkte Z 09625 Mode D'emploi

Before fi rst use
ATTENTION!
• Risk of suffocation! Keep the packaging material away from children and animals.
1. Unpack all parts and make sure that the product contents are com-
plete (see chapter
there are no transport damages. If you identify damages to the compo-
nents, do not use them (!), instead contact our customer service centre.
Please keep in mind: Residue in the dust bin is attributed to quality controls of
the device!
2. Pull any foils or stickers off of the device and accessories.

Mounting and removing accessories

ATTENTION!
• Before you mount or remove accessories, make sure that the device is switched off
and not connected to the mains supply.
Nozzles and suction hose
Use as a fl oor vacuum cleaner
1
19
"Product contents
• The nozzles are inserted up to the stop point in the suction
opening on the dust bin (9).
• To remove the nozzles or the suction hose, pull it out of the
suction opening.
1. Open the latch (12) for the handle bar on the
motor unit.
2. Push
ceptacle
til the latch for the handle bar locks in.
To remove the handle bar, you must open the
2
latch by pulling it back and then pulling the
handle bar out.
and device overview")
the handle bar
on the motor
ATTENTION! Make sure that
the latch correctly locks into
place to prevent the handle
from slipping out!
EN
and that
into the re-
unit un-