Troubleshooting; Technical Data - DS Produkte Z 09625 Mode D'emploi

EN

Troubleshooting

Should your device no longer function properly, exhibit damages or require a spare part,
please contact the customer service centre. For your own safety, do not perform any
repairs yourself. The following table gives you tips on how to resolve minor problems
yourself.
Problem
The device is not
working.
The suction power
is weak.
The device
emits dust when
vacuuming.
An unpleasant
odour develops
when vacuuming.

Technical Data

Model:
Product number: Z 09625
Voltage supply:
Output:
Safety class:
Potential cause/solution/tips
• Has the mains plug been correctly inserted in the socket?
Correct the position of the mains plug.
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Is the dust bin too full? Empty the bin.
• Are the fi lters heavily laden with dirt? Clean them.
• Are the fi lters damaged or can they no longer be adequately
cleaned? Contact customer service.
• Is the nozzle in use plugged or is the suction hose plugged?
Turn the device off, pull the mains plug out of the socket and
remove the obstruction.
• Is the fl oor nozzle or the turbo nozzle dirty? Remove the dirt.
• Is the dust bin full? Empty the dust bin.
• Have the dust fi lters been inserted correctly? Push the dust
fi lter fi rmly into the dust bin so that it rests up against the
housing wall on all sides.
• Are you using the device for the fi rst time? An odour often
develops when using new devices for the fi rst time. The
odour should disappear once you have used the device a
few times.
• Are the fi lters heavily laden with dirt? Clean them.
• Is the dust fi lter damaged or can it no longer be adequately
cleaned? Contact customer service.
VC-S1001B
220 – 240 V ~ 50 Hz
1000 W
II, IP20
22
Customer Service /
Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls to German landlines are
subject to charges. The cost
varies depending on the service
provider.)