Troubleshooting; Technical Data - DS Produkte PC-C001-5 Mode D'emploi

Troubleshooting

If your device no longer functions properly, exhibits damages or requires a spare part, please
contact our customer service. For your own safety, do not perform any repairs yourself.
The following table gives you tips on how to resolve minor problems yourself.
Problem
The vacuum cleaner has no
suction power.
The suction power is weak.
The device emits dust when
vacuuming.
An unpleasant odour develops
when vacuuming.

Technical data

Model:
Article number:
Voltage supply:
Output:
Safety class:
09065_DE-GB-FR-NL_V0.indb 23 09065_DE-GB-FR-NL_V0.indb 23
All manuals and user guides at all-guides.com
Potential cause/solution/tips
• Is the mains plug properly connected with the socket?
Correct the position of the mains plug.
• Is the socket defective? Try another socket.
• Check the fuse for your mains connection.
• Is the auxiliary air valve on the handle open? Close
the valve.
• Is the dust bin too full? Empty the bin.
• Are one or both fi lters heavily laden with dirt? Clean
the fi lter(s).
• Is the attached nozzle, telescoping tube or suction
tube plugged? Turn the device off, pull the mains plug
out of the socket and remove the blockage.
• Has the dust bin been closed properly and inserted in
the device? Correct this if necessary.
• Are you using the device for the fi rst time? An odour
often develops when using new devices for the fi rst
time. The odour should disappear once you have used
the device a few times.
• Has the device already been used on multiple occa-
sions? The device is defective. Turn off the device, pull
the mains plug out of the socket and promptly contact
customer service.
PC-C001-5
Z 09065
220–240 V ~ 50/60 Hz
max. 2600 W
II
23
06.09.2013 08:12:10 06.09.2013 08:12:10