Adjusting The Length Of The Telescoping Tube; Accessories - DS Produkte PC-C001-5 Mode D'emploi

Adjusting the length of the telescoping tube

Accessories

Please note: The illustrations in these instructions may vary slightly from the real device.
ATTENTION!
❐ Always turn off the device and pull the mains plug out of the socket before you change the
nozzles!
The different nozzles can be mounted either on the tapered end of the telescoping
tube or directly on the handle.
Floor nozzle
Tile nozzle
Brush nozzle
09065_DE-GB-FR-NL_V0.indb 19 09065_DE-GB-FR-NL_V0.indb 19
All manuals and user guides at all-guides.com
1. Push the slider up and hold it down.
2. Set the desired length of the telescoping tube and release the
slider.
3. Push the telescoping tube further until it audibly locks into
place.
The fl oor nozzle is suitable both for carpets and smooth
fl oors. You can switch between a smooth fl oor and carpet
using the foot switch:
• A brush and rubber lip can be folded out on the bottom
of the nozzle for smooth fl oors.
• The brush and rubber lip are folded in when cleaning car-
pet fl oors.
The tile nozzle is suitable for padding, cleaning the inside of
passenger vehicles as well as every nook and cranny that can't
be reached with other nozzles.
The brush nozzle is suitable for all uneven objects, furniture,
lamps, profi ling strips and baseboards, window sills etc.
19
06.09.2013 08:12:06 06.09.2013 08:12:06